top of page

Base Turbo Kit

Original price

$2,995.00

Sale price

$2,500.00

Base JET Turbo Kit Includes:

  • GT15 Turbocharger
  • Alloy Intake Plenum for HIF44 1 ¾ SU Carb
  • Intake Charge Pipe Assembly with Blow Off Valve (pipe and elbows from turbo to carburetor)
  • Turbo Header Pipe Exhaust Manifold (pipe from head to turbo)
  • Downpipe (pipe from turbo to exhaust system exits in stock location and connects to your existing muffler front pipe)
  • Oil System (supply and return from engine)
  • Air Cleaner
  • 1 x 5/16 - 24 UNF stainless nut (6 point)
  • 6 x 5/16 - 24 UNF stainless nut (12 point)
  • 2 x Exhaust washers outer
  • 2 x Exhaust washers mid 0 mm no step
  • 2 x Exhaust washers mid 1 mm step
  • 2 x Exhaust washers mid 2 mm step
  • 2 x Exhaust washers inside 0 mm no step
  • 2 x Exhaust washers inside 1 mm step
  • 2 x Exhaust washers inside 2 mm step
  • 2 x Exhaust washer 4mm thick M8 x 21
  • 1 x Gasket from header to turbo or use high temp RTV (Ultra Copper)
  • 2 x M8 x 1.25 x 25 stainless screw (Attach manifold to turbo)
  • 4 x M8 x 16 x 1.6 stainless washers 
  • 1 x M8 x 1.25 x 35 stainless screw (Long bolt to attach manifold to hardware)
  • 1 x M8 x 1.25 stainless nut (for long bolt)
  • 1 x Manifold gasket (Gasket Header to cylinder head)
  • 4 x M8 x 1.25 x 25 stainless screw
  • 4 x M8 x 16 x 1.6 stainless washers
  • 1 x Bung plug for O2 sensor
  • 1 x Wastegate relocation bracket
  • 1 x Silicon hose 1/2 inch ID and 6 inches long
  • 2 x Hose clamp (small) (Worm drive for 1/2 inch silicon hose, 20mm OD)
  • 1 x Fitting for oil feed, M12 x 1.5 to AN4 with 1.5mm oil restrictor
  • 1 x Fitting drain
  • 2 x M6 x 1.0 x 16 hex head Stainless (Drain pipe adapter, may be socket head)
  • 4 x M6 x 12 x 1.6 washer (To mount wastegate bracket to turbo and 2 for wastegate relocation bracket)
  • 1 x 1/8 NPT brass plug (Block port for wastegate, air cleaner blocks it)
  • 1 x Rubber hose from turbo outlet to intake pipe, 35mm ID to 51mm ID, 90 degree (Hose from turbo outlet to intake pipe)
  • 1 x Hose clamp - small (Clamp on turbo compressor)
  • 1 x Hose clamp - large (Clamp on hose from compressor to pipe)
  • 1 x Snap ring
  • 1 x Rubber o-ring
  • Rubber hose from intake pipe to carb adapter, 2 x 2 inches silicon 90
  • Hose clamp - large
  • Hose clamp - large
  • Aluminum carb adapter
  • Fittings carb adapter 1/8 NPT to 1/4 hose
  • 1 x Carb gasket
  • 1 x 1/8 NPT brass bung (Bung for air temp sensor)
  • 2 x 5/16-18 x 1 inch UNC hex head
  • 2 x 5/16-18 x inch UNC hex nut
  • 2 x M8 x 16 x 1.6 stainless washers
  • Intake vacuum adapter
  • Vacuum adapter copper washer
  • Vacuum hose, 3mm or 1/8 inch
  • Vacuum hose, 6mm or 1/4 inch
  • 1/8 NPT to 1/4 hose
  • Vacuum fitting T
  • 1 x Fitting - special 3-way
  • 1 x Fitting 1/8 NPT male to AN4 straight
  • 1 x Fitting 1/8 NPT male to AN4 90 degree
  • 1 x Oil feed hose from engine to turbo, 24 inches long
  • 1 x Oil drain plate for 1/2 NPT fitting
  • 1 x Fitting 45 degree for 1/2 hose to 1/2 NPT
  • 10x6x6 Y fitting

Quantity

Only 8 left in stock

bottom of page