Turbo Kit with EFI Throttle Body, Fuel Pump, Ignition, Master Kit Bundle

Base JET Turbo Kit Includes:
GT15 Turbocharger
Alloy Intake Plenum for EFI Throttle Body
Intake Charge Pipe Assembly with Blow Off Valve (pipe and elbows from turbo to throttle body)
Turbo Header Pipe Exhaust Manifold (pipe from head to turbo)
Downpipe (pipe from turbo to exhaust system exits in stock location and connects to your existing muffler front pipe)
Oil System (supply and return from engine)
Air Cleaner
EFI turbo fuel pump
1 x 5/16 - 24 UNF stainless nut (6 point)
6 x 5/16 - 24 UNF stainless nut (12 point)
2 x Exhaust washers outer
2 x Exhaust washers mid 0 mm no step
2 x Exhaust washers mid 1 mm step
2 x Exhaust washers mid 2 mm step
2 x Exhaust washers inside 0 mm no step
2 x Exhaust washers inside 1 mm step
2 x Exhaust washers inside 2 mm step
2 x Exhaust washer 4mm thick M8 x 21
1 x Gasket from header to turbo or use high temp RTV (Ultra Copper)
2 x M8 x 1.25 x 25 stainless screw (Attach manifold to turbo)
4 x M8 x 16 x 1.6 stainless washers 
1 x M8 x 1.25 x 35 stainless screw (Long bolt to attach manifold to hardware)
1 x M8 x 1.25 stainless nut (for long bolt)
1 x Manifold gasket (Gasket Header to cylinder head)
4 x M8 x 1.25 x 25 stainless screw
4 x M8 x 16 x 1.6 stainless washers
1 x Bung plug for O2 sensor
1 x Wastegate relocation bracket
1 x Silicon hose 1/2 inch ID and 6 inches long
2 x Hose clamp (small) (Worm drive for 1/2 inch silicon hose, 20mm OD)
1 x Fitting for oil feed, M12 x 1.5 to AN4 with 1.5mm oil restrictor
1 x Fitting drain
2 x M6 x 1.0 x 16 hex head Stainless (Drain pipe adapter, may be socket head)
4 x M6 x 12 x 1.6 washer (To mount wastegate bracket to turbo and 2 for wastegate relocation bracket)
1 x 1/8 NPT brass plug (Block port for wastegate, air cleaner blocks it)
1 x Rubber hose from turbo outlet to intake pipe, 35mm ID to 51mm ID, 90 degree (Hose from turbo outlet to intake pipe)
1 x Hose clamp - small (Clamp on turbo compressor)
1 x Hose clamp - large (Clamp on hose from compressor to pipe)
1 x Snap ring
1 x Rubber o-ring
Rubber hose from intake pipe to carb adapter, 2 x 2 inches silicon 90
Hose clamp - large
Hose clamp - large
Aluminum carb adapter
Fittings carb adapter 1/8 NPT to 1/4 hose
1 x Carb gasket
1 x 1/8 NPT brass bung (Bung for air temp sensor)
2 x 5/16-18 x 1 inch UNC hex head
2 x 5/16-18 x inch UNC hex nut
2 x M8 x 16 x 1.6 stainless washers
Intake vacuum adapter
Vacuum adapter copper washer
Vacuum hose, 3mm or 1/8 inch
Vacuum hose, 6mm or 1/4 inch
1/8 NPT to 1/4 hose
Vacuum fitting T
1 x Fitting - special 3-way
1 x Fitting 1/8 NPT male to AN4 straight
1 x Fitting 1/8 NPT male to AN4 90 degree
1 x Oil feed hose from engine to turbo, 24 inches long
1 x Oil drain plate for 1/2 NPT fitting
1 x Fitting 45 degree for 1/2 hose to 1/2 NPT
10x6x6 Y fitting
 
EFI Kit Contents:
SC One Piece Throttle Body
SC Billet Injector Adapter
Genuine Bosch 440cc High Flow Fuel Injectors
Billet Fuel Rail
High Flow Inlet Manifold
Bespoke Complete Wiring Loom
Delta D400 Fully Mappable ECU
USB Interface Dongle
Coolant & Air Temperature Sensors
SC A-Series Complete Crank Trigger Kit
Ignition Coil, Billet Bracket & High quality Magnecor leads
Billet fuel pressure regulator
Billet thermostat housing
 
Thank you for your order, we really appreciate your business.