Base JET Turbo Kit Includes:

• GT15 Turbocharger
• Alloy Intake Plenum for HIF44 1 ¾ SU Carb
• Intake Charge Pipe Assembly with Blow Off Valve (pipe and elbows from turbo to carburetor)
• Turbo Header Pipe Exhaust Manifold (pipe from head to turbo)
• Downpipe (pipe from turbo to exhaust system exits in stock location and connects to your existing muffler front pipe)
• Oil System (supply and return from engine)
• Air Cleaner
• 1 x 5/16 - 24 UNF stainless nut (6 point)
• 6 x 5/16 - 24 UNF stainless nut (12 point)
• 2 x Exhaust washers outer
• 2 x Exhaust washers mid 0 mm no step
• 2 x Exhaust washers mid 1 mm step
• 2 x Exhaust washers mid 2 mm step
• 2 x Exhaust washers inside 0 mm no step
• 2 x Exhaust washers inside 1 mm step
• 2 x Exhaust washers inside 2 mm step
• 2 x Exhaust washer 4mm thick M8 x 21
• 1 x Gasket from header to turbo or use high temp RTV (Ultra Copper)
• 2 x M8 x 1.25 x 25 stainless screw (Attach manifold to turbo)
• 4 x M8 x 16 x 1.6 stainless washers 
• 1 x M8 x 1.25 x 35 stainless screw (Long bolt to attach manifold to hardware)
• 1 x M8 x 1.25 stainless nut (for long bolt)
• 1 x Manifold gasket (Gasket Header to cylinder head)
• 4 x M8 x 1.25 x 25 stainless screw
• 4 x M8 x 16 x 1.6 stainless washers
• 1 x Bung plug for O2 sensor
• 1 x Wastegate relocation bracket
• 1 x Silicon hose 1/2 inch ID and 6 inches long
• 2 x Hose clamp (small) (Worm drive for 1/2 inch silicon hose, 20mm OD)
• 1 x Fitting for oil feed, M12 x 1.5 to AN4 with 1.5mm oil restrictor
• 1 x Fitting drain
• 2 x M6 x 1.0 x 16 hex head Stainless (Drain pipe adapter, may be socket head)
• 4 x M6 x 12 x 1.6 washer (To mount wastegate bracket to turbo and 2 for wastegate relocation bracket)
• 1 x 1/8 NPT brass plug (Block port for wastegate, air cleaner blocks it)
• 1 x Rubber hose from turbo outlet to intake pipe, 35mm ID to 51mm ID, 90 degree (Hose from turbo outlet to intake pipe)
• 1 x Hose clamp - small (Clamp on turbo compressor)
• 1 x Hose clamp - large (Clamp on hose from compressor to pipe)
• 1 x Snap ring
• 1 x Rubber o-ring
• Rubber hose from intake pipe to carb adapter, 2 x 2 inches silicon 90
• Hose clamp - large
• Hose clamp - large
• Aluminum carb adapter
• Fittings carb adapter 1/8 NPT to 1/4 hose
• 1 x Carb gasket
• 1 x 1/8 NPT brass bung (Bung for air temp sensor)
• 2 x 5/16-18 x 1 inch UNC hex head
• 2 x 5/16-18 x inch UNC hex nut
• 2 x M8 x 16 x 1.6 stainless washers
• Intake vacuum adapter
• Vacuum adapter copper washer
• Vacuum hose, 3mm or 1/8 inch
• Vacuum hose, 6mm or 1/4 inch
• 1/8 NPT to 1/4 hose
• Vacuum fitting T
• 1 x Fitting - special 3-way
• 1 x Fitting 1/8 NPT male to AN4 straight
• 1 x Fitting 1/8 NPT male to AN4 90 degree
• 1 x Oil feed hose from engine to turbo, 24 inches long
• 1 x Oil drain plate for 1/2 NPT fitting
• 1 x Fitting 45 degree for 1/2 hose to 1/2 NPT
• 10x6x6 Y fitting